New Year, Another New Computer

It’s been 7 years since my last new computer, and so I decided it was time to finally bite the bullet and not only upgrade, but build a new computer myself.

The last two of my computers were pre-built PCs, bought mainly because in both cases I didn’t have the time to invest in selecting parts and building my own machine. But this time I had the time to spare, so I started picking up parts bit by bit until I finally had everything I needed.

These are the parts I selected for my new computer:

  • Intel Core i7-6700 (Skylake) 3.4 GHz CPU
  • Cooler Master Hyper 212 EVO CPU cooler
  • Asus Z170M-PLUS motherboard
  • 16 GB of DDR4-2400 RAM
  • Intel 256 GB 600p M.2 SSD
  • Fractal Design Core 1500 MicroATX tower case
  • Corsair 430W power supply
  • Sabrent USB 3.0 media card reader

I’d also be re-using the same video card (an NVIDIA GForce GTX 750) from my old computer, along with an extra USB 3.0 expansion card (I have a lot of USB devices), as well as my old SATA SSD and the 1 TB &  3 TB hard drives.

The main goal of this new PC was to build something that would both last me a long time and also vastly improve performance in the one place I really needed it – disk speed. My old PC was actually holding up quite well for its age – especially since I had an SSD for the boot drive – but my old PC’s motherboard only supported the older, slower SATA interface, which prevented me from taking full advantage of that SSD.

The new PC would have one of those new SSDs that used both the M.2 connector and the PCI Express (PCIe) interface, which should allow me to take full advantage of the speed of a modern SSD. This, combined with the faster RAM (double the amount my old PC could handle) and the slightly faster CPU, would give me a machine with impressive performance for everything I needed it to do. Additionally, I should be able to upgrade this computer to keep it going for many years to come.

Now, keep in mind it’s been something like 15 years since I last put a computer together myself – I’m a little out of practice. But then again, there’s nothing fundamentally difficult about building a computer from parts, so I wasn’t too worried.

Probably the hardest part was figuring out how to mount the absolutely massive CPU cooler I’d bought – it used a fairly complex bracket mounting that I’d never seen before (remember again how long it’s been since I’ve done anything like this). But after staring at the directions for a bit it finally “clicked” and I got it attached without much fuss.

The rest of the computer was pretty much just plugging things together and trying to keep all the wires neat & tidy. But the moment of truth was when I finally switched it on for the first time – and it booted!

After that, I installed Windows 10 and all my programs (and boy howdy was it a long list of things to reinstall – I use a lot of programs on a day-to day basis since this is both my work and personal computer) and transferred my settings over with a program meant for that purpose.

Since I was re-using my existing drives, I didn’t really need to move much in the way of files – I even re-mounted the drive volumes to the same drive letters as I had on my old computer, so all the paths and shortcuts I’d set up would work just the same as before.

Once my programs and settings were installed, I could finally start to get a feel for the new computer I’d built – and I was immediately impressed with how fast it was! Even with all the programs that run at startup, it booted (POST to desktop) in about 14 seconds, which was much faster than my old machine.

Additionally, all my programs now opened almost immediately and everything was just faster and smoother. Adobe Lightroom – which was one of the programs that lagged quite a bit on my old machine – now opens very quickly and the complex UI renders on screen without any delay. I can switch between photos without waiting for the screen to draw and all my edits and adjustments are applied quickly and smoothly.

Another thing that saw a big gain for me on this new machine is my virtual machines – I run a number of VMs for compatibility testing and so forth, but using them was often a bit of a pain because they were so slow. Now though, they run much better, and once I’m satisfied that I don’t need anything from my old SSD, I’ll wipe it and move my virtual machines to that drive for even more speed (disk speed is a huge factor in virtual machine performance).

Aside from the usual new PC headaches (mainly of the “now I have to put everything back the way I like it” type), the new computer has been a rousing success – I’m exceptionally pleased with it. It runs fast, and it also runs quite cool – at idle the CPU temperature is not much above room temperature. The new motherboard has a ton of high-speed USB 3.0 ports, which makes writing to my external backup drive go much faster, as well as downloading RAW photo files from my camera’s memory card.

All in all, I’m very happy with how my new PC build has gone, and I think I’ll be happy with it for just as many years as (if not more than) the last one!

By Keith Survell

Geek, professional programmer, amateur photographer, crazy rabbit guy, only slightly obsessed with cute things.